News and Updates

21/01/18 Shock and Parcels

This weekend, despite the weathers efforts, has seen work continue with the imitation Shock gear for B850498.  Apart from a few final finishing details, the main components for the west side are in place.

The components are all bolted in place using existing holes in the chassis and having been a former tank wagon chassis there are a fair few of them.

With a number of Photocharters after the Winter Gala we took the time, in the dry, to fill one of the vans with a prototypical load.  Parcels were originally loaded in the CCT and the usual BR care was taken to off load these.

27048619_10159809381900103_1614051999_o

Christened the theatrical van it is available for events and charters for cameo scenes on platforms or in yards.

 

 

17/01/18 New Logo

26941182_10159788120705103_1665246314_n

Our thanks go out to Jack Shaw, Railway Artist, for his efforts in assisting with our logo design.  The design pays homage to that of our home, the Great Central Railway.
We are all volunteers and the railway demonstrates and uses our wagon collection.

Why Wagon and Wagon?
The usual title for a preserved railways Rolling Stock works is Carriage and Wagon, on the GCR this is based at Rothley. Our collection covers Wagons only hence our title.

14/01/18 Bars and ‘End Doors’

This weekend, the group’s efforts have been directed in two directions, on B784409 and on B850498.

Last week the previous secluded dockside underframe of B784409 was brought out into the open and scraped down ready for paint. Saturday saw the compressor repaired and the underframe spray gun brought out to finish this van off. Today sees the handbrake end picked out in white and the bearing end caps picked out in yellow.

Saturday’s work on B850498 sees the end panel on the ‘blue end’ of the van removed. This was removed due to having a soggy bottom, and a British Rail bodge panel in the middle which covered over a hole in the sheet. The removed panel was drawn around on a new sheet of plywood, then cut out. it was then offered into the van to check the fitment and then taken out and primed inside the GUV.

Today the new end panel was fitted to the van, and ended by being painted into undercoat

Matt has also undertaken the task of producing some ‘shoc’ gear for this vehicle. This is a purely cosmetic item, but is an important part of this van’s profile.

09/01/18 Axle Exams

This weekend has seen full axle box examinations carried out on B850498.
Removal of the covers, clean, inspection of the axle and pads. It is clear that the chassis has been stood for some time so 3 of the boxes required new pads. Boxes then oiled and reassembled after the new pads had soaked. Over the next few weeks we shall keep an eye on the oil levels and monitor the oil use, initially, this will be high until the pad is fully soaked.

B784409 has now been shunted into the box van train and joins sister B783082. This has allowed access to the unrestored east side underframe which has been scrapped cleaned and is ready for paint. This will be done next weekend and will be ready for the Winter Gala, this will also be the first time the vehicle has run in preservation.

Also of note on B784409 we removed the east side wagon plate,  this was fitted in 1981 when the vehicle had its vacuum brakes removed, fitted with air brakes and new suspension becoming VEA 230097. This uncovered the original HMLE data panel. This gives Route available and speed data for the vehicle under various load conditions.