Tag: 783082

Hello everyone and welcome to another update from Quorn. This week has been one of defect clearance, cleaning and finishing off vac cylinder repairs, including a new improved special tool! Its also been lovely to see the tank train running on Saturday for as part of the firing school. Okay, lets jump in to what we’ve done..

First job was to fit a flip down stop board in the four foot of the dock road to protect the vehicles in the siding, and the people working on them.

Ernie arrived with a new plate to use for pressure testing vacuum cylinder domes once they have been repaired. This also means we can test 18 inch domes as well. Thanks to Ernie for sorting this out. Between Ernie and myself we got the plate sorted and made two o rings to act as the seal between the plate and the dome.

Ernie also worked on another tool used to push out the guide bush in the bottom of the vacuum cylinder.

Charlie, James Oliver and Dan started tidying the area outside the coach beyond the dock as it was starting to look quite untidy and overgrown. Some equipment was re-sited and a lot of brush clearance was done.

Mark, Tom, Oliver and Dan finished off washing the vans in the yard. Mark and Tom then moved over to needle gunning in the pockets of 3689.

Nick and I cleared some of the defects noted against the vans when they have their Fitness to Run exams. A few handbrake rack bolts, underkeep bolts and a handbrake chain. With a bit of assistance we also change two buffers on B784409 on opposite corners.

I had managed to get hold of some soda media in the week and finally had the opportunity to try out the soda blaster, firstly on a vacuum cylinder, but also on 3689. It made a bit of a mess, but thankfully its water soluble! We’ll keep experimenting on this to find out what its best to use it for.

We pressure tested the latest cylinder and found a few further pin holes, however the new plate worked a treat!

Thanks for reading, and join us next week to see what we get up to! Cheers, Ross

A slight picture light update this week, apologies! In other news, as some of you will have seen on our Facebook page, we have been awarded the 2020 Mortons Media (Rail Express) Modern Traction Award from the Heritage Rail Association, which is in addition to our two shortlistings.

This weekend has seen the final vacuum brake overhaul completed on our van train and a release valve replace on B763305. The final two vans, B852838 and B783082, have each had their brake cylinders lifted down, overhauled and replaced. With two vans left, we spend one day on each van. Saturday saw us concentrate on the Shocvan, starting by stripping the cylinder down enough to lift down.  The cylinder put up a fight when we tried to dismantle it, with rust around the dome studs preventing the dome coming free.  The cylinder has been untouched for at least 29 years, which is the amount of time it has spent at the railway. Unfortunately the cylinder had no tag fitted after its last overhaul, so the last overhaul date is unknown.

As a member of station staff, Matt and Michelle attended the Quorn Station staff Christmas Do in the afternoon, which meant Matt spent the morning signwriting the signs for the WHSmith’s kiosk at Loughborough station.

While the light was disappearing I was rebuilding vacuum release valves to replenish the stock of valves overhauled by Dave. While doing this I also rebuilt our two C-type valves, which as it turns out use the same diaphragm as the more common E-type valves.

Sunday had Nick, Dave, Matt, James and I in attendance. We started by pulling the vans down to be able to access the final cylinder on B783082. Dave set about stripping the cylinder to make it ready to lift down, removing the piston rod, release valve and piston rod cover in record quick time.

We lifted the cylinder down and began the now familiar task of the overhaul.

This then got refitted and reconnected.

With the plyboard available, I attended to a previous mistake on B763305.

The vans were pushed back down, and the test rig again coaxed into life to test the Shocvan, Vanwide and B763305. Matt went under the Shocvan with his flair lamp to check for any holes.

Both the Vanwide and Shocvan still held their brakes on upon leaving this evening. B763305 now holds for the required amount of time. We finished the testing by lunch, so spent the afternoon clearing the site van out, and putting the tools back and investigating now defective tools. Matt continued signwriting the other kiosk sign.

Thanks for reading, and join us again next week to find out what we get up to.