Tag: B783082

  • 25/10/26 – Not beaten by Storm Boelo

    25/10/26 – Not beaten by Storm Boelo

    Hello and welcome to a blustery weekend’s update from Quorn. The storm tried its best to remove the roof covering from a Vanwide while we make good progress with the LNER Tube wagon and find some more oily schmoo.

    Saturday Ross took shelter from the rain underneath Test Car 2 to remove the second brake cylinder.

    Whilst I worked inside the Test Car tiding up after we’d used the instrument area and kitchen for Esso Plate painting & varnishing through the summer.

    Nick and Ernie continued with some lamp repairs.

    With the brake cylinder removed Ross and myself cleaned up the mounting bolts and prepared a spreader plate and threaded rods ready to safely remove the cylinder end cover.

    Sunday was a much brighter and dryer day, however the wind was still prominent. On arrival into the yard we found that the storm overnight has made a good attempt at removing the roof covering from Vanwide B783082.

    This van is on our to-do list plan over the Christmas period to have the roof covering replaced; so in the meantime to make it safe, span-set straps were secured over what was left of the roof covering by Tom, Oliver and Dan.

    Ross and Charlie dismantled the second Test Car brake cylinder, much like the first, there was a lot of oily schmoo inside. Dan and Charlie helped clean up the cylinder and components.

    On inspection the cylinder seal isn’t in too bad a state however as it’s thought to have been in there for at least 20 years, not worked for 10 years, and the other cylinder needs replacing, it makes sense to get new seals them both.

    Nick, Ernie, Mark, Tom and Oliver continued with the work on the LNER Tube wagon E301588, cleaning up more of the underframe and the floor retention plate strips.

    Red oxide primer was then applied to the the majority of the cleaned up underframe areas as well as the plate strips.

    Dan and Charlie carried out some sticker & glue removal from Tank 1802 using the newly acquired special glue removal discs, which have proved very effective.

    Ross used the new digital measuring calipers to establish that the throat thickness of our spare wheelsets is sufficient to allow the wheelsets to be turned before they are re-used.

    Join us again soon, all the best, Dave