Hello everyone, here’s another weekend update from us at Quorn. Progress has continued on A6090 and the Pipe is very close to completion.
I concentrated on the remaining signwriting on the Pipe, completing the Empty to wording on the East side of the wagon.
Nick concentrated on A6090, scraping the barrel of yet more paint trying to get to a stable layer. In places the old Shell/BP black and white livery was coming through so we’re getting down the layers now.
Barry, Tom and Oliver joined the push on A6090, with Tom and Barry using the needle gun and Oliver joining Nick on the scraper.
The weather sadly prevented any varnishing on the Pipe, so I ended up moving from one thing to another until the Hydrovane burst it’s compressed air feed hose. Barry helped me strip it down, and we’ll be sorting that between us for next weekend.
Oliver and I swept out the A type container to have a look at the floor, which aside from being poorly supported seems to be in okay condition.
Hopefully the weather is good enough to varnish the Pipe next weekend, but we’ll take whatever comes. Join us then and see what we get up to!
Hello everyone and welcome to another QWW update. For me, this weekend has been one of much signwriting, everyone else was concentrating on A6090.
Before that though, we continue to tidy up after Railways at Work, and with the van train back at Quorn, Nick and Charlie put the barrels back in the barrel van to protect them from the elements.
I made a start chalking up the Pipe for its signwriting, starting with the west side number panel. By the end of the day, the west side was complete barring a few words on the ‘Empty to’ wording.
Nick, Richard, Mark and Dan sequestered themselves under and around A6090 to begin the big scraped down of the underframe. We think the paint on the tank has been affected by being stored in a tunnel as it was coming off it large chunks.
I with coffee in hand got an early start on Sunday picking up where I left off. I taped off the box for the branding and let a distracted Dan have a go at painting it
I moved to the east side to make a start there, assisted again by Dan who had a ago at the B of the number panel. This just leaves me with the branding to apply on the east side and both D plates.
Nick and Richard continued to scrape the underframe of the tank, with most of what he scraped ending up in Nick’s boots.
The last job of the weekend was to have another crack at Hector’s wheel, which is now fixed, barring being inflated again, and maybe another lick of paint.
Good evening all, and welcome to another QWW update. This week despite the heat, we’ve fitted a vacuum throughpipe, tried to sort out a wheel and tyre for Hector and Andy is making more progress on the GUV.
Being the type of tank it is, A6090 was built unfitted. This is ordinarily fine, however most good trains at the GCR run with vacuum and without a throughpipe, this wagon is less likely to be used. Having recovered a complete throughpipe on his travels, Nick decided it would be put to use on the tank.
Nick assisted by Tom and Mark, first removed one swan-neck from the pipe. The pipe measured at nigh on 15ft, which made it too short initially for the underframe. Removing the swan-neck will allow us to extend the pipe, but more on that later.
The pipe was hung underneath the wagon in its approximate route down the inner solebars with large cable ties. Borrowing the magnetic mount drill from Rothley, Barry, Tom and I drilled holes in the underframe to accept the pipe clamps to hold the pipe to the wagon.
Jamie at Carriage and Wagon very kindly whipped us up a 2ft6in length of pipe to screw onto the rest of the throughpipe, leaving us to thread one end of it and assemble the complete pipe. (Thanks Jamie!)
Back under the wagon, the straight coupler was fitted using plenty of jointing compound, tightened up then the extension piece screwed into the coupler. The swan-neck was fitted, again with plenty of jointing compound.
This is when the heavens opened, so we made a quick effort to tidy everything up and hide! The rest of the day were to tidy up around the yard, and take Danny for a skip run.
Andy has spent a bit more time this weekend filling the GUV in the attempt to smarten it up, we’ll soon be progressing to a coat of paint for it livery yet to be decided.
Last week, Dave had spotted the Hector had a flat tyre and was leaning over in the garage. This week, I attempted to re-inflate it but to no avail. Barry and I separated the rim to discover a small hole in the inner tube. A spare was fitted but we struggled to get the locking ring back into the rims, so we admitted defeat this weekend and will have a rethink.
I think that is everything this week, next week we are hoping for slightly cooler weather so we can continue with the Pipe and get that over the line. There will also be a vacuum leak of test to do for A6090. Join us then and thank you for reading.
We start September with Test Car 2 open again, this time supporting the Diesel Gala long weekend in some glorious sunshine at Quorn.
Unfortunately we didn’t have the demonstration wagon with the Test Car so no slip/coupling demos; however we still fitted the slip coupling and were able to show the special slip/brake flashing lights unit in action using the diesel brake tender further along the siding to simulate a ‘slipped’ test wagon.
Many thanks to the Type One Locomotive Company for their support this weekend with 1705; this was the first time that Test Car 2 has been coupled with a Class 47 in preservation. On Sunday Mark and Tom helped out welcoming visitors into the Class 47 cab.
In the 1980s a Class 47 was normal traction used to haul Test Car 2 during slip/brake testing; so we’ve been able to re-create (well nearly) the look of this 1987 test train.
Thanks to everyone (including a special visitor) who took the time to visit us in the Test Car and to listen to myself, Barry and Richard talking about how and why British Rail carried out testing of freight wagons.
And thank you to everyone who supported us by purchasing our new booklets, or by visiting our little stall.
In other news Andy & Harry have made a start on the east side of the GUV M94052, during the last week the bodyside has been scraped down and any bare metal treated with red oxide primer.
To end, here’s a few of our pics from the weekend. Join us again next week when we’ll be back to some wagon work, all the best, Dave
Hello everyone and welcome to another Quorn Wagon & Wagon update. This week we’ve painted the pipe into it’s gloss coat and have prepared for next weekend with the Test Car opening and progress other smaller jobs.
During the week, Nick and the lads primed and undercoated the east side doors and painted the underframe all round the wagon in black gloss, which looks really smart.
Come the weekend, Dave assisted by Thomas and Tom tidied the inside of the Test Car, even scraping the flaking paint from the generator compartment roof to then give it a fresh coat of white primer.
New volunteer Barry (welcome Barry!) gave the outside and quick hose down which also helped to smarten the coach up a bit.
Nick, Dan, Mark and Thomas continued painting the underframe of the Pipe, concentrating on the lower west side and the head stocks.
With the Pipe underframe finished, Nick and Mark went to look at tank A6090 to remove the last parts of the fuel dispensing system, which I ended up being roped into. The outfeed pipe on this wagon now looks more as it should, and there is one final job to do before the scrape and paint.
On sunday, the weather held us up putting the gloss on the Pipe, so Thomas painted the generator room door in Pearl Grey.
In the afternoon there was a gap in the clouds, so Nick and Thomas went for the bauxite for the Pipe. Each started with an end and then Nick got carried away and started down one side.
Monday was a much nicer day, so most people got stuck into the Pipe, though Dave and Barry did some odd jobs like pumping up the road vehicle tyres and re-shuffling them after Railways at Work.
After the last few bits of bauxite gloss was applied to the PipeNick moved onto details on the wagon, those being the usual swan-necks, hand brake ends and lamp brackets while the lads painted the inside of the wagon with some wood preserver as an experiment. Dave also got a chance to start the signwriting, applying the vacuum relase chord stars and assembling the templates for the bodyside writing.
The last job for the team was to repair some of our wooden steps ready for opening up the Test Car at the diesel gala.
Andy and Harry have started work on the GUV, as it’s been looking quite tired for some time now. I spent most of the weekend replacing the fluorescent tubes in the GUV with LED replacement units. 6 down, 4 to go! I also replaced the cracked beacon on Hector with a replacement
That about wraps things up for this bank holiday weekend. Next weekend is the Diesel gala, and as I’m sure I’ve mentioned the Test Car will be open to visitors in the yard so do come down and see us. We’ll be open from 10-4 Friday until Sunday. Thanks for reading!
A great weekend for our team helping out with the Railways at Work Gala. Oh and a new arrival.
So first we have a new arrival to report, 20T Tank A6090 which was previously at the Ecclesbourne Valley Railway. This tank has an interesting history; spending many years at the Railway Technical Centre in Derby as their internal user fuel tank, 024296.
No time was wasted getting stuck in to assessing the tank, removing some of the additional brackets and pipe; then checking the axleboxes, journals, bearings, oil and oil pads. A start was also made scraping some of the accumulated grime off.
The main focus this weekend has been the Railways at Work Gala, and I think the best way to sum up the weekend is in pictures, so here’s some of ours.
Thank you to everyone who came along this weekend and made it a special, very enjoyable Gala.
Join us again next week when we’ll return to the Pipe wagon. All the best, Dave
Hello everyone! I’ll start off with a reminder about next weekend’s Railways at Work Gala, full details are on the GCR WebPage here. We’re all looking forward to it, and you’ll see some of us dressed up taking part in the action.
This week, we’ve done some odd jobs and put the last two planks in the Pipe. Tom, Dan, Oliver and Charlie along with Nick were on site on Tuesday carrying on with the Pipe, neddle gunning the east side and priming the metal work. They also found a broken brake block carrier on 3777 and oiled its brake rigging.
Nick went to fetch these from Harlows on Saturday morning, Dave started applying Kiki’s new identity, which can be seen in its entireity next weekend.
Thomas, Nick and I removed the 2 old planks from the East side, ready for the new planks to be dropped in and checked for size. Nick and Thomas also finished off the scraping of the underframe.
The plank was cut down in length and then run through our thicknesser to skim a few millimetres from the planks to remove some machining marks.
The planks were then dry fitted and drilled. The planks were removed and the painted into primer in the GUV.
The changable weather over the weekend has changed plans a little, so instead of fitting the planks first off, we took the opportunity to paint both new planks into undercoat.
Thomas paid some last attentions to 5209, picking out the red lettering on the bearing caps afterwhich he got the undercoat out and painted both ends of the Pipe.
At our event, Dave noticed that the hand brake rack on 3436 is slightly twisted on one side. This was improved with a tickle from the sledgehammer.
Our final act was to drop the 2 painted planks into the Pipe, which went well haing been pre-drilled and prepped.
That wraps up this weekend’s activities, if you can do pop down next weekend and see the event unfold, we’ll try and get some covert pictures through out the day too.
Despite the inclement weather continuing, we have had a busy weekend tidying & sorting the theatrical vans in preparation for the upcoming Railways at Work Gala, doing some housekeeping, attending to gutters and a sticky wagon door, progressed the Pipe wagon and we also managed a bit of work on tank 3777.
We’re very much looking forward to the Railways at Work Gala which this year will (amongst many other attractions) feature two Pick-up-Goods trains operating in and out of the yard at Quorn.
It’s therefore important that the we get the right goods in the right places before we start.
Thanks to Jack and Andrew (the phantom box juggler) for their help too.
At our Open Weekend in July, Kiki took part adorned with our friends’ West Hill Wagon Works logos; however in preparation for the Railways at Work event Kiki will receive a more appropriate livery. The first step was to carefully remove the temporary vinyl lettering and clean the paintwork. Kiki‘s new livery will be revealed at the Railways at Work Gala on the 19th August.
The heavy rain on Saturday highlighted to us that some of the gutters on Test Car 2 and the Mess coach had become clogged with muck and debris. These were cleared out allowing the rainwater to flow along the gutters rather than overflowing down the coach sides.
Sunday and the weather improved allowing us to work on the Pipe wagon B740654; after a couple of weeks for the planks to settle we tightened all the door bolts on the west side & south end, and trimmed a couple of slightly long ones.
A final bit of scraping of door furniture then we set about applying some red-oxide primer to the door furniture and stanchions.
Whilst checking the wagons in preparation for railways at work, we came across a very reluctant drop-side door on steel high ADB280364. The cause was a lipped top latch post which was dressed lightly with a grinder and some red-oxide paint applied. This will make the door much easier to open and shut during the loading/unloading demonstrations.
Following the removal of the air driven pump from Tank wagon 3777 last week, the remaining section of pipework was removed. The brackets on the underframe were ground off and red-oxide primer applied.
So despite the weather we’re a lot closer to being ready for Railways at Work Gala, and we’ve made some good progress on the Pipe and Tank.
A quick reminder that our new Pocket Stockbooks are available from the team, pop down and see us at the south end of Quorn & Woodhouse yard at the weekend.
120 Pages with colour pictures and details of all the Quorn Wagon & Wagon group’s rolling stock in a handy A6 pocket sized ring bound booklet.
After last weekends excitiment, this weekend has felt a bit slower and relaxed. Nick is away at summer camp, but that doesn’t mean progress is any less!
I started off with a last bit of tidying up after our open weekend with collecting a set of our steps left by the marquee. Dave, with grandson Oli to assist, removed the Deceleration meter bracket from the Bogie Bolster, B928135.
Joined by Mark and Dan, we then took a look at B740654 to see what further cleaning was required prior to paint. With a bit left to do on the North and East side, the Hydrovane was started and the needle guns deployed.
Along with the needle guns, I sanded off the east side and south end and started scraping paint of of the retained planks. Cut End preservative was applied to all cut plank ends on the wagon to help prolong their life. Dave drilled out one of the door reatrder pins for a split pin as it was noticed that one was missing.
The last job for the day was to remove the air driven pump from 3777 as this wagon will be reverted back to its Esso livery. The pump won’t be thrown away thoguh, I’m sure we can find a use for it.
Dave and I started applying wood primer to the ends and outward faces of the planks, the inner surfaces will have some clear preservative applied before the wagon returns to traffic.
All bare wood surfaces aside from the East side were painted in primer.
Next week will see the east side sanded and painted into primer (weather permitting), we might even start to apply some undercoat. See you then!
Hello everyone and welcome to the update after our open weekend. We had a good weekend despite the awful weather on Saturday. Thank you to everyone for the work put into make the event a success. It was great to see so many people visit us and to see the Test Car out and about the line behind the Heavy Tractor Group’s 37714.
Dave and Richard spent some time getting some props sorted for the looming Railways at Work gala and going along with the shunts for our event.
We also had a new arrival this week, a 3rd Esso tank wagon, 3777. Initial impressions of this are that it is quite solid, this got a wash and brush up on the Sunday when the weather allowed it.
To finish off this update, I’ll put up some pictures from the Open Weekend. Thank you again for all those who came to see our wagons and us. Next weekend should see some more work done on the Pipe wagon weather dependant, if not, I’m sure we’ll find something to do. Join us then!
