Hello everyone, and welcome to this week’s update from Quorn. With the south yard looking a little bit like Abbey Lane sidings with amount of Esso tank wagons around, the gang have pressed on with preparations on both 3606 and 3621.
Ernie removed the last two splash guard plates from 3621, which opened up the area around the wheels for cleaning down and hoovering. Nick set about straightening these with his most favourite tool to get them flat after the rust build up had bowed them at each end. Two of them require a weld repair due to corrosion.
Harry, Charlie and new starter Dan continued the laborious job of cleaning and de-scaling the end pockets and the chassis of the Esso tank. While they did this, Ernie and I removed the heating coil end plug from the wagon to clean out the threads and refit it.
Nick and I moved onto re-assembling the vacuum cylinder ready for re-fitting to 3606, which involved removing the nuts from the studs and re-fitting the studs into the dome.
The chassis preparation was continued on Sunday by Tom, Mark, Oliver, Harry, Charlie, Nick, Bradley and Ernie, with the weather thankfully a little drier than yesterday. It appears at some point Charlie got a little distracted by a spot on the Fish van body…
Dan, Mark and Charlie also managed to get some areas of both chassis primed or gloss coated
With the weather starting to look up, we’ll soon be moving onto surface preparation of the barrel on both 3621 and 3606, which means paint isn’t too far away. Now just the small matter of getting some more Esso plates…
The weekend of the 5th & 6th April is the railway’s Reunification Gala weekend, where we’ll have the Test Car open to visitors after a shunt around this week to allow opening up easier. If you plan on coming down, do pop in and visit us. Thanks for reading, and see you next weekend!
Leave a Reply